RECORD ROLLER - Complete 4-In-1 Record Cleaning Kit (by Vinyl Vac)
SKU:
$39.97
$39.97
Unavailable
per item
Description
4 ITEMS INCLUDED! Large Microfiber Cloth, 4-inch Record Roller, Stylus Brush, & Anti-static Brush. All in one convenient package!
CLEAN RECORDS IN SECONDS! Our non-liquid, adhesive Record Roller will clean the entire surface of your 33LP records in just a few passes! Our unique adhesive material is designed to only pick up the surface dirt and grime leaving no scratches or adhesive residue behind.
4-INCH RECORD ROLLER! Unlike other rollers, the Record Roller is 4 inches wide, allowing you to efficiently cover the entire length of 33LP records. It only takes 4 quick passes to clean the surface of your records!
WASHABLE & REUSABLE! The adhesive Record Roller can be rinsed in warm water and air dried after every cleaning session.
DESIGNED BY RECORD LOVERS! This complete 4-in-1 Kit by Vinyl Vac features some of the most popular, hand picked, vinyl cleaning tools designed to clean and preserve your Vinyl Record Collection!
CLEAN RECORDS IN SECONDS! Our non-liquid, adhesive Record Roller will clean the entire surface of your 33LP records in just a few passes! Our unique adhesive material is designed to only pick up the surface dirt and grime leaving no scratches or adhesive residue behind.
4-INCH RECORD ROLLER! Unlike other rollers, the Record Roller is 4 inches wide, allowing you to efficiently cover the entire length of 33LP records. It only takes 4 quick passes to clean the surface of your records!
WASHABLE & REUSABLE! The adhesive Record Roller can be rinsed in warm water and air dried after every cleaning session.
DESIGNED BY RECORD LOVERS! This complete 4-in-1 Kit by Vinyl Vac features some of the most popular, hand picked, vinyl cleaning tools designed to clean and preserve your Vinyl Record Collection!
LISTED BELOW ARE THE ITEMS INCLUDED IN THE RECORD ROLLER COMPLETE KIT
MICROFIBER CLOTH
A Microfiber Cloth is included in your recording cleaning kit. This is designed to be a safe
surface to clean your records on. Simply lay out the cloth on a flat surface making sure there are no lumps or creases before you place your record on it.
RECORD ROLLER
This 4-inch roller is perfectly sized to fit on a 33lp record without touching the label. In just 2 easy passes, with little to no pressure, you’ll remove the surface dirt and grime that is left on your record. For best results, rinse the roller and let dry after cleaning 3-4 records.
NEEDLE BRUSH
A Needle Brush is included in your kit, allowing you to safely and easily clean your turntable’s needle. To clean your record stylus using the needle brush, lightly brush off the bottom of your record stylus in a back to front motion. This will remove any static and or potential residue.
DISCLAIMER: Do NOT brush side to side with your needle brush to prevent bending your stylus.
ANTI-STATIC BRUSH
An Anti-Static Brush is included in your kit, designed to remove any surface static left on your record. This brush is recommended to be used before each play. Place your newly cleaned record on your turntable and turn the turntable on. Carefully lower the brush onto the spinning record and let it spin under the brush for about 3-4 passes, letting the bristles prevent any leftover surface static.
A Microfiber Cloth is included in your recording cleaning kit. This is designed to be a safe
surface to clean your records on. Simply lay out the cloth on a flat surface making sure there are no lumps or creases before you place your record on it.
RECORD ROLLER
This 4-inch roller is perfectly sized to fit on a 33lp record without touching the label. In just 2 easy passes, with little to no pressure, you’ll remove the surface dirt and grime that is left on your record. For best results, rinse the roller and let dry after cleaning 3-4 records.
NEEDLE BRUSH
A Needle Brush is included in your kit, allowing you to safely and easily clean your turntable’s needle. To clean your record stylus using the needle brush, lightly brush off the bottom of your record stylus in a back to front motion. This will remove any static and or potential residue.
DISCLAIMER: Do NOT brush side to side with your needle brush to prevent bending your stylus.
ANTI-STATIC BRUSH
An Anti-Static Brush is included in your kit, designed to remove any surface static left on your record. This brush is recommended to be used before each play. Place your newly cleaned record on your turntable and turn the turntable on. Carefully lower the brush onto the spinning record and let it spin under the brush for about 3-4 passes, letting the bristles prevent any leftover surface static.
4 SIMPLE & EFFECTIVE STEPS TO CLEAN YOUR VINYL RECORDS!
STEP 1:
Lay down the Microfiber Cloth on a flat surface, spread completely out with no lumps or creases and place your record onto the spread cloth.
STEP 2:
Take your 4-inch Record Roller making sure the adhesive packaging is removed. With little to no pressure, roll the Record Roller in a complete pass in both directions making sure you’ve removed all the surface dirt and grime.
STEP 3:
When you are ready to play your newly cleaned record, take your needle brush and clean off your turntable’s stylus. To do this, lightly brush the bottom of your turntable’s stylus in a back and forth motion. Do NOT brush side to side to prevent bending your stylus’s position.
STEP 4:
Before each play of any record we recommend using your anti-static brush to remove any surface static that may be left on your record. To do this, place your newly cleaned record on your turntable and turn the turntable on. Carefully lower the brush onto the spinning record and let it spin under the brush for about 3-4 passes, just allowing the bristles to brush up on your record's surface.
That’s it, Enjoy the sound of newly cleaned records!
Lay down the Microfiber Cloth on a flat surface, spread completely out with no lumps or creases and place your record onto the spread cloth.
STEP 2:
Take your 4-inch Record Roller making sure the adhesive packaging is removed. With little to no pressure, roll the Record Roller in a complete pass in both directions making sure you’ve removed all the surface dirt and grime.
STEP 3:
When you are ready to play your newly cleaned record, take your needle brush and clean off your turntable’s stylus. To do this, lightly brush the bottom of your turntable’s stylus in a back and forth motion. Do NOT brush side to side to prevent bending your stylus’s position.
STEP 4:
Before each play of any record we recommend using your anti-static brush to remove any surface static that may be left on your record. To do this, place your newly cleaned record on your turntable and turn the turntable on. Carefully lower the brush onto the spinning record and let it spin under the brush for about 3-4 passes, just allowing the bristles to brush up on your record's surface.
That’s it, Enjoy the sound of newly cleaned records!